AIMS Power 600 Watt Pure Sine Inverter Charger 12V ETL Listed to UL 458 This 600 watt pure sine inverter charger ETL listed and conforms to UL 458 standards, is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency of 80%. It is packed with unique features and it is one of the most advanced inverter chargers in the market today. It features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. The AC/Battery priority and auto generator start functionality make it suitable to work in either backup power or renewable energy applications. When customized to Battery priority mode via a DIP switch, the inverter will extract maximum power from external sources and renewable energy systems, with only minimal battery cycles being required. The overloads capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer. In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the qualified AC utility is restored, the relay is energized and the load is automatically transferred to AC utility. When switching to battery priority mode via the DIP switch, the inverter will extract power from external power sources in renewable energy systems and a minimal cycle of the battery will be required. With the availability of the auto generator start, an electrical generator can be integrated into the system as a backup and started when the battery voltage goes low. Features: 600 watt low frequency inverter - ETL listed to UL 458 standards 1800 watt surge for 20 seconds 300% surge capability AC Input Cable GFCI outlet Conformal Coated for Marine Applications Multi Stage Smart Charger 20 Amp charges GEL, Lead, AGM, Lithium Remote Panel Available Auto Frequency Detect From AC Input Less than 10msec Typical Transfer Time Selectable 25W power save mode (hibernation) 7 Battery Type Settings for Charger Automatic transfer switch Specifications: Continuous Output Power: 600 Watts Surge Rating: 1800 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage: 120Vac Nominal Efficiency: 80% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz ± 0.3Hz / 60Hz ± 0.3Hz Typical Transfer Time: 10ms (Max) THD: <10% Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Low Batter Voltage Recover: 13.0Vdc Idle Consumption: <<25W - depending on search mode Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 20A Over Charge Protection Shutdown: 15.7V Selectable Charge setting based on battery type Adjustable charge current off-20%-100% Four Stage Smart Charger Bypass - 7amps Low voltage trip: 80\90V +/-4% Low voltage trip: 90@V +/-4% High voltage trip: 140V +/-4% High voltage re engage: 135V +/-4% Max input AC voltage: 150 Dimensions: Unit Weight: 18 lbs. Unit Size L x W x H: 14.75 x 7 x 5.5 inches Shipping Weight: 20 lbs. Shipping L x W x H: 17 x 9.75 x 8.5 inches

AIMS Power 4000 Watt Pure Sine Inverter Charger 12Vdc / 240Vac Input & 120/240Vac Split Phase Output Combine this solar inverter charger with a deep-cycle battery bank for off-grid, mobile and emergency backup power. The most popular feature of this unit is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds. When using the terminal block, this inverter peaks at 12000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers. If you are looking for an inverter with similar capabilities but a lower wattage capacity, check out the 2000 watt low frequency AIMS Power inverter charger. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110/120 OR 220/230/240 volts of alternating current. The inverter accepts 12 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 12 volt battery system. The inverter outputs 120/240 volts AC. The marine-coated or conformal-coated boards also make this inverter great for mobile applications, as it protects the product from dust or water vapor that may be present in the air. A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. Tools with higher startup surges like air compressors may require an upgrade to the 6000 watt low frequency AIMS Power inverter charger. This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment. During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing. Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant. This inverter also has an optional remote port, allowing you to turn the product on and off from a distance. Click here to purchase the remote. Other popular applications for this inverter include powering lights and other appliances in an off-grid cabin, providing electricity for a mobile business or mobile office, and running camping equipment. Features: 4000 watt low frequency inverter 12000 watt surge for 20 seconds 300% surge capability 120/240 Vac output split phase(/li> Battery priority selector AC direct connect terminal block Marine coated and protected Multi stage smart charger 115 Amp Charges lithium LiFePO4, gel, AGM and lead batteries. We recommend checking battery charging specifications for all batteries. Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 4000 Watts Surge Rating: 12000 Watts (20 Seconds) Output 120/240 Vac - Split Phase 50 or 60hz Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 F to 122 F (-10 C to 50 C) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm/shutdown: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Idle Consumption: 50 Watts Power Saver Mode Idle Consumption: 21 Watts Charger Specifications: Output voltage: Depends on battery Type Charger Rate: 115A Over Charge Protection Shutdown 15.7V Selectable Charge setting based on battery type Adjustable charge current off-20%-100% Four Stage Smart Charger Transfer Switch Specifications: 40 amp automatic transfer switch 10 ms (max) Dimensions: Unit Weight: 64 lbs. Unit Size L x W x H: 23.5 x 8.5 x 7.0 inches Shipping Weight: 75 lbs. Shipping L x W x H 30.5 x 14.5 x 13.75inches

AIMS Power 4000 Watt Pure Sine Inverter Charger 12Vdc to 120Vac Output Combine this solar inverter charger with a deep-cycle battery bank for off-grid, mobile and emergency backup power. The most popular feature of this unit is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds. When using the terminal block, this inverter peaks at 12000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers. If youre looking for an inverter with similar capabilities but a lower wattage capacity, check out the 2000 watt low frequency AIMS Power inverter charger. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. The inverter accepts 12 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 12 volt battery system. The inverter outputs 120 volts AC. The marine-coated or conformal-coated boards also make this inverter great for mobile applications, as it protects the product from dust or water vapor that may be present in the air. A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. Tools with higher startup surges like air compressors may require an upgrade to the 6000 watt low frequency AIMS Power inverter charger. This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment. During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing. Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant. This inverter also has an optional remote port, allowing you to turn the product on and off from a distance. Click here to purchase the remote. Other popular applications for this inverter include powering lights and other appliances in an off-grid cabin, providing electricity for a mobile business or mobile office, and running camping equipment. Features: 4000 watt low frequency inverter 12000 watt surge for 20 seconds 300% surge capability Battery priority selector AC direct connect terminal bock for hardwire Marine coated and protected Multi stage smart charger 100 Amp Charges lithium LiFePO4, GEL, AGM and lead batteries. We recommend to check battery charging specifications for all batteries. Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 4000 Watts Surge Rating: 12000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 F to 122 F (-10 C to 50 C) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Shutdown: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Idle Consumption: <3.47 amps DC Power Saver Mode Idle Consumption: <0.53 amps DC Charger Specifications: Output voltage: depends on battery type Charger rate: 115A Over charge protection shutdown 15.7V Selectable charge setting based on battery type Adjustable charge current: off-20%-100% Four stage smart charger Transfer Switch Specifications: 40 amp automatic transfer switch 10 ms (max) Dimensions: Unit Weight: 64 lbs. Unit Size L x W x H: 23.5 x 8.75 x 7.10 inches Shipping Weight: 75 lbs. Shipping L x W x H 30.5 x 14.25 x 13.75inches

AIMS Power 4000 Watt Pure Sine Inverter Charger 12Vdc / 120Vac Input & 120/240Vac Split Phase Output Back ordered until 8/1/19 Combine this solar inverter charger with a deep-cycle battery bank for off-grid, mobile and emergency backup power. The most popular feature of this unit is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds. When using the terminal block, this inverter peaks at 12000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers. If you are looking for an inverter with similar capabilities but a lower wattage capacity, check out the 2000 watt low frequency AIMS Power inverter charger. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110/120 OR 2208/230/240 volts of alternating current. The inverter accepts 12 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 12 volt battery system. The inverter outputs 120/240 volts AC. The inverter also charges at 120 Volts. The marine-coated or conformal-coated boards also make this inverter great for mobile applications, as it protects the product from dust or water vapor that may be present in the air. A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. Tools with higher startup surges like air compressors may require an upgrade to the 6000 watt low frequency AIMS Power inverter charger. This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment. During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing. Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant. This inverter also has an optional remote port, allowing you to turn the product on and off from a distance. Click here to purchase the remote. Other popular applications for this inverter include powering lights and other appliances in an off-grid cabin, providing electricity for a mobile business or mobile office, and running camping equipment . Features: 4000 watt low frequency inverter 12,000 watt surge for 20 seconds 300% surge capability 120/240 VAC output Split Phase Charges with 120 Vac multi-stage smart charger 115 Amp battery priority selector Charges lithium LiFePO4, gel, AGM and lead batteries. We recommend checking battery charging specifications for all batteries. Direct connect AC terminal block Marine coated and protected Remote panel available auto frequency 10msec typical transfer time optional 25W power save mode 7 battery type settings for charger 7 Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 4000 Watts Surge Rating: 12,000 Watts (20 Seconds) Output 120/240 Vac - Split Phase 60hz Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 F to 122 F (-10 C to 50 C) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low battery Voltage Restart: 15.5Vdc Idle Consumption: 50 Watts Power Saver Mode Idle Consumption: 21 Watts Charger Specifications: Output voltage: Depends on battery Type Charger Rate: 115A Over Charge Protection Shutdown 15.7V Selectable Charge setting based on battery type Adjustable charge current off-20%-100% Four Stage Smart Charger Transfer Switch Specifications 40 amp automatic transfer switch 10 ms (max) Dimensions: Unit weight: 75 lb Unit size: L x W x H: 31.5 x 8.75 x 7.25 inches Shipping weight: 87 lb Shipping size: L x W x H: 35.5 x 14.50 x 13.50 inches Shipping Weight: 75 lbs. Shipping L x W x H 30.5 x 14.5 x 13.75 inches

AIMS Power 3000 Watt Pure Sine Inverter Charger The 3000 watt 12 volt low frequency AIMS Power inverter charger is two products in one. The inverter transforms DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to power tools and appliances of all varieties. It also has a built-in 100 amp battery charger which uses AC power, like from the grid or from a fuel-powered generator, that can be used to recharge a battery bank as well. The battery-type selector on the top of the unit allows the ability to adjust the voltage provided to the bank. Popular applications for this inverter include: off-grid home or business back up power, providing electricity for a mobile business or mobile office, and running camping equipment. The inverter accepts 12 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 12 volt battery system. The inverter outputs 120 volts AC. The most popular feature of this unit is the direct connect terminal block, which allows a 300 percent surge capacity for up to 20 seconds. When using the terminal block, this inverter peaks at 9000 watts with the power to run many tools and appliances with a startup surges, such as a refrigerators, freezers, microwaves and blow dryers. Combine this inverter charger with a deep-cycle battery bank for off-grid, mobile and emergency backup power. If you are looking for an inverter with similar capabilities but with smaller wattages2000 watt low frequency AIMS Power inverter charger or the 1000 watt low frequency AIMS Power inverter charger. The low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance. The marine-coated or conformal-coated boards also make this inverter great for mobile and/or coastal applications, as it protects the product from dust or water vapor that may be present in the air. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. It also features one GFCI power outlet with two receptacles for easy, safe access to the usable AC current, which allow for a peak of 1,500 watts. *Important to remember: the ac outlets have no surge capacity, so you must use the direct connect terminal block to harness the surge capabilities of this inverter. Tools with higher startup surges like a well pumps and air compressors may require an upgrade to the 6000 watt low frequency AIMS Power inverter charger. This 3000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment. In the event of a power outage, this inverter combined with a battery bank can be used to power a few lights, a refrigerator and perhaps a few other necessities. ***Just always be sure to check the wattage requirements of the appliances being used before powering them with any inverter. *** During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing. Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant. This inverter also has an optional remote port, allowing you to turn the product on and off from a distance. Features: 3000 watt low frequency inverter 9000 watt surge for 20 seconds -3x surge capability Battery priority selector AC direct connect terminal block GFCI - 15 amps Marine coated and protected Multi stage smart charger 100 Amp charges gel, AGM, lead and lithium LiFePO4 Remote panel available Auto gen start Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Specifications: Inverter Output Specifications: Continuous Output Power: 3000 Watts Surge Rating: 9000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) Bypass Terminal Breaker: 40 amps THD: < 10% DC Ambient Operating Temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Charger Breaker - 30 amps Idle Consumption: 55 Watts Power Saver Mode Idle Consumption: 21.7 Watts Charger Specifications: Output voltage: Depends on battery Type Charger Rate: 100A Dimensions: Unit Weight: 58 lbs. Unit Size L x W x H: 16.48 x 8.74 x 7.1 inches Shipping Weight: 64 lbs. Shipping L x W x H 23.5 x 13.0 x 12.5 inches

AIMS Power 3000 Watt Pure Sine Inverter Charger - ETL Certified Conforms to UL458 Standards AIMS Power 3000 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz.Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 3000 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. The 3000 watt inverter charger is capable of a 9000 watt surge for 20 seconds and can run at 3000 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: Listed to UL 458 Standards and CSA 22.2 No 107.1 3000 watt low frequency inverter 9000 watt surge for 20 seconds -3x surge capability Battery priority selector AC direct connect terminal block GFCI - 20 amps Marine coated and protected Multi stage smart charger 100 Amp GEL, AGM, Lead and lithium LiFePO4 Remote panel available Auto gen start Auto frequency 10msec typical transfer time 7 battery type settings for charger Selectable 25W power save mode (hibernation) Automatic transfer switch Specifications: Inverter Output Specifications: Listed to UL 458 Standards Continuous Output Power: 3000 Watts Surge Rating: 9000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage: 100-110-120Vac Nominal Efficiency: >92% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass Terminal Breaker - 40 amps Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Idle Consumption: 55 Watts Charger Breaker - 30 amps Power Saver Mode Idle Consumption:21.7 Watts Charger Specifications: Output voltage: Depends on battery Type Charger Rate: 100A Dimensions: Unit Weight: 58 lbs. Unit Size L x W x H: 15.35 X 11 X 7 inches Shipping Weight: 66 lbs. Shipping L x W x H: 20.5 X 13.8 X 12.2 inches

AIMS Power 2000 Watt Pure Sine Inverter Charger with Transfer Switch The 2000 watt 12 volt low frequency AIMS Power inverter charger transforms DC (direct current) power, stored by batteries, into AC (alternating current) electricity that can be used to run most all tools and appliances. This inverter also has a built in AC-to-DC battery converter charger and transfer switch, which allows users to recharge their battery bank from an AC source such as a fuel-powered generator, shore power or a regular outlet at home. This inverter is also available in 24 and 48 volt models. The 2000 watt 24 volt Pure Sine Inverter Charger and 2000 watt 48 volt Pure Sine Inverter Charger are in stock and ready for same-day shipping as well. Use this product for renewable solar, off-grid home and business, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz. It boasts an average 10 millisecond transfer time with the built-in transfer switch. This is an awesome feature for use with backup power applications, as it makes the inverter a nearly uninterrupted power supply (UPS) when combined with a battery bank. It is an industrial-grade unit with the ability to withstand surges of up to 6000 watts for 20 seconds, and it achieves this by virtue of its direct connect terminal block. This feature is one of the more sought-after in the inverter industry, allowing users to surpass the 1,500 watt maximum output of a GFCI outlet that would typically be seen on an inverter. This inverter also features a battery-type selector, which helps user regulate the voltage going into the battery bank. This capability can be a big money-saver since treating the battery bank properly will maximize its lifespan. Use this inverter to power tools on a work truck, as it will run most electric chainsaws, portable grinders, shop vacs, and more. Or use it to power appliances in your RV, as it won't produce any annoying noise or pollution. A low frequency label has been given to this inverter because of the heavy-duty transformer that provides a lowered level of total harmonic distortion (THD) (when compared to modified sine) produced during the DC-to-AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency. It also provides a quieter, nearly inaudible performance. The inverter also has conformal-coated (marine-coated) boards, making it marine-grade and resistant to dust and/or water vapor that may travel through the air and could otherwise be damaging to the unit. This feature is great for boating applications, like powering a stereo system, for instance. Check out the 4000 watt low frequency AIMS Power inverter charger for a comparable unit that can handle the startup surges (up to 12,000 watts for 20 seconds) of tools with larger electrical requirements, such as an air compressor. As with all AIMS Power inverters, the PICOGLF20W12V120V is covered under a 30-day money back guarantee as well as a one year manufacturers warranty and free technical support. Features: 2000 watt low frequency inverter 6000 watt surge for 20 seconds 300% surge capability Battery Priority Selector AC direct connect terminal Block Marine coated and protected Multi stage smart charger 70 Amp for gel, AGM, lead and lithium LiFePO4 GFCI - 15 amps Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 2000 Watts Surge Rating: 6000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass terminal breaker - 30 amps Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low battery Voltage Restart: 13.3Vdc Idle Consumption: 28 Watts Charger Breaker - 20 amps Power Saver Mode Idle Consumption: 12.7 watts Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 70A Over Charge Protection Shutdown 15.7V Selectable Charge setting based on battery type Adjustable charge current off-20%-100% Four Stage Smart Charger Transfer Switch Specifications: 30 amp automatic transfer switch 10 ms (max) Dimensions: Unit Weight: 41 lbs. Unit Size L x W x H: 16.48 x 8.74 x 7.1 inches Shipping Weight: 53 lbs. Shipping L x W x H 23.5 x 13.0 x 12.5 inches

AIMS Power 2000 Watt Pure Sine Inverter Charger- ETL Certified Conforms to UL458 / CSA Standards AIMS Power 2000 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. From off-grid home or business back up power systems to campsites, tailgating parties or solar systems. Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 1500 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. This inverter charger is capable of a 6000 watt surge for 20 seconds and can run at 2000 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: ETL Listed to UL 458 Standards and CSA 22.2 No 107.1 2000 watt low frequency inverter 6000 watt surge for 20 seconds -3x surge capability Battery priority selector AC direct connect terminal block GFCI - 20 amps Marine coated and protected Multi stage smart charger 70 Amp for gel, AGM, lead and lithium LiFePO4 Remote panel available Auto gen start Auto frequency 10msec typical transfer time 7 battery type settings for charger Selectable 25W power save mode (hibernation) Automatic transfer switch Specifications: Inverter Output Specifications: Listed to UL 458 Standards Continuous Output Power: 2000 Watts Surge Rating: 6000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage: 100-110-120Vac Nominal Efficiency: >92% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) Bypass Terminal Breaker - 30 amps THD: < 10% DC Ambient Operating Temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Idle Consumption: 28 watts Charger breaker - 20 amps Power Saver Mode Idle Consumption: <12.7 watts Charger Specifications: Output voltage: Depends on battery Type Charger Rate: 70A Dimensions: Unit Weight: 47.4 lbs. Unit Size L x W x H: 15.35 x 11 x 7 inches Shipping Weight: 55 lbs. Shipping L x W x H: 20.5 X 13.8 X 12.2 inches

AIMS Power 1500 Watt Pure Sine Inverter Charger AIMS Power 1500 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This inverter is also great in a smaller RV or boat. If 1500 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. The 1500 watt inverter charger is capable of a 4500 watt surge for 20 seconds and can run at 1500 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: 1500 watt low frequency inverter 4500 watt surge for 20 seconds -3x surge capability Battery priority selector Terminal block GFCI - 15 amps Marine coated and protected Multi stage smart charger 50 Amp for gel, AGM, lead and lithium LiFePO4 Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 1500 Watts Surge Rating: 4500 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage 100-110-120Vac Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass terminal breaker - 20 amps Typical Transfer Time: 10ms (Max) THD: < 10% DC Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Charger Breaker - 20 amps Idle Consumption: 13.5 Watts Power Saver Mode Idle Consumption: 8 Watts Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 50A Dimensions: Unit Weight: 33 lbs. Unit Size L x W x H: 14.1 x 8.74 x 7.10 inches Shipping Weight: 42 lbs. Shipping L x W x H 20.75 x 12.75 x 12.5 inches

AIMS Power 1500 Watt Pure Sine Inverter Charger - ETL Certified Conforms to UL458 / CSA Standards AIMS Power 1500 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This inverter is also great in a smaller RV or boat. If 1500 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. The 1500 watt inverter charger is capable of a 4500 watt surge for 20 seconds and can run at 1500 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: Listed to UL 458 Standards and CSA 22.2 No 107.1 1500 watt low frequency inverter 4500 watt surge for 20 seconds -3x surge capability Battery priority selector AC direct connect terminal block GFCI - 20amps Marine coated and protected Multi stage smart charger 50 Amp for gel, AGM, lead and lithium LiFePO4 Remote panel available Auto gen start Auto frequency 10msec typical transfer time 7 battery type settings for charger Selectable 25W power save mode (hibernation) Automatic transfer switch Specifications: Inverter Output Specifications: Listed to UL 458 Standards Continuous Output Power: 1500 Watts Surge Rating: 4500 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage: 100-110-120Vac Nominal Efficiency: >92% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass Terminal Breaker - 20 amps Typical Transfer Time: 10ms (Max) THD: < 10% DC Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low /battery Voltage Restart: 13.0Vdc Idle Consumption: 13.5 watts Charger Breaker - 20 amps Power Saver Mode Idle Consumption: 8 watts Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 50A Dimensions: Unit Weight: 38 lbs. Unit Size L x W x H: 15.35 x 11 x 7 inches Shipping Weight: 46 lbs. Shipping L x W x H: 20.5 X 13.8 X 12.2 inches

AIMS Power 1000 Watt Pure Sine Inverter Charger - 12 Volt Here is the AIMS Power 1000 Watt Pure Sine Low Frequency Inverter with built-in battery charger. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it to: off-grid home back up power, solar systems, business back-up power, campsites, tailgating parties or any recreational locations. Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 1000 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension chord plugged into your wall outlet at home. This inverter charger is capable of a 3000 watt surge for 20 seconds and can run at 1000 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: 1000 watt low frequency inverter 3000 watt surge for 20 seconds 300% surge capability Battery priority selector Terminal block GFCI outlet - 10 amps Marine coated and protected Multi stage smart charger 35 Amp for gel, AGM, lead and lithium LiFePO4 Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 7 battery type settings for charger Automatic transfer switch Specifications: Inverter Output Specifications: Continuous Output Power: 1000 Watts Surge Rating: 3000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) Bypass Breaker - 20 amps THD: < 10% DC Ambient operating temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 degree Celcius to 50 degree Celcius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.3Vdc Idle Consumption: < 12.5 watts Charger Breaker 10 amps Power Saver Mode Idle Consumption: <7.5 wattsC Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 35A Over Charge Protection Shutdown 15.7V Selectable Charge Setting Dial Adjustable Charge Current: off-20%-100% Four Stage Smart Charger Transfer Switch Specifications: 30 amp auotmatic transfer switch 10 ms (max) Dimensions: Unit Weight: 35 lbs. Unit Size L x W x H: 14.1 x 8.74 x 7.10 inches Shipping Weight: 39 lbs. Shipping L x W x H 20.75 x 12.75 x 12.50 inches

AIMS Power 1000 Watt Pure Sine Inverter Charger - ETL Certified Conforms to UL458 / CSA Standards AIMS Power 1000 Watt Pure Sine Low Frequency Inverter with built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. From home or business back-up power demands to campsites/cabins, tailgating parties or any recreational location. Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 1000 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. The 1000 watt inverter charger is capable of a 3000 watt surge for 20 seconds and can run at 1500 watts continuously. As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will sleep and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite. Features: Listed to UL 458 Standards and CSA 22.2 No 107.1 1000 watt low frequency inverter 3000 watt surge for 20 seconds -3x surge capability Battery priority selector AC direct connect terminal block GFCI - 20 amps Marine coated and protected Multi stage smart charger 35 Amp for gel, AGM, lead and lithium LiFePO4 batteries Remote panel available Auto gen start Auto frequency 10msec typical transfer time 7 battery type settings for charger Selectable 25W power save mode (hibernation) Automatic transfer switch Specifications: Inverter Output Specifications: ETL listed to UL 458 standards Continuous Output Power: 1000 Watts Surge Rating: 3000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Output Voltage: 100-110-120Vac Nominal Efficiency: >92% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass Breaker - 20 amps Typical Transfer Time: 10ms (Max) THD: < 10% DC Ambient Operating Temperature: 14 Degree Fahrenheit to 122 Degree Fahrenheit (-10 Degree Celsius to 50 Degree Celsius) Input Specifications: Nominal Input Voltage: 12.0Vdc Minimum Start Voltage: 10.0Vdc Low Battery Alarm: 10.5Vdc-11.0Vdc Low Battery Trip: 10.0Vdc-10.5Vdc High Voltage Alarm: 16.0Vdc Low Battery Voltage Restart: 13.0Vdc Idle Consumption: 12.5 watts Charger Breaker - 10 amps Power Saver Mode Idle Consumption: 7.5 watts Charger Specifications: Output Voltage: Depends on battery Type Charger Rate: 35A Dimensions: Unit Weight: 36.5 lbs. Unit Size L x W x H: 15.35 x 11 x 7 inches Shipping Weight: 44 lbs. Shipping L x W x H: 20.5 X 13.8 X 12.2 inches

AIMS Power 1000 Watt Pure Sine Inverter Charger Hardwire Only This AIMS 1000 Watt pure sine inverter charger features an easy hardwire terminal for AC input and output. Its simple design makes for an easy install and includes all protections and has a selectable battery charger. Perfect for an RV, boat, sump pumps and other applications that use city power and inverter power. Once this inverter is installed, it will automatically go back an forth between city power and inverter power. If city power is lost, the inverter will automatically keep your devices running as long as the inverter has battery power. No frills! Economical and easy to use. Features: 1000 Watt continuous power 2000 Watt surge Selectable 25A or 55A battery charger Built in Transfer Switch 12 Volt DC input Pure sine wave Conformal Coated Circuit Board AC Direct Connect Terminal Block Efficiency: 86% - 90% Over load and Short circuit protection On/off switch Dual cooling fans thermally controlled Instruction manual 1 year tech support 1 Year Warranty Parts and Labor replacement Optional Remote Switch Available (Part# REMOTEHF) Specifications: Continuous output power: 1000 Watts Surge power capability (peak power): 2000 Watts Battery charge current 25A or 55A (optional) AC inverter transfer time: < 20ms DC input / operating voltage: 10-16 Volts AC input voltage range: 120 Volts AC +/- 10% Output voltage: 120 Volts AC Output frequency: 60 Hz Output wave form: pure sine wave (THD < 3%) Over voltage shutdown: 16 +/- 0.5 Volts Battery low voltage alarm: 9.8 +/- 0.3 Volts Battery low voltage shutdown: 9.5 +/- 0.5 Volts Battery overcharge protection voltage: 14.4 Volts Battery float charge voltage: 13.5 Volts Efficiency range: 86% - 90% No load current: 1.2A No load minimum operating temperature: 32 degrees Fahrenheit Unit weight 12.1 LBS Shipping weight 15lbs Unit dimensions 17.25"x9.25"x4"

AIMS Power AGM 12V 200Ah Deep Cycle Battery Heavy Duty This 12V AGM battery is a heavy duty , deep cycle battery ideal for back-up power and stored power applications. Affordable without compromising quality, this battery will provide power for years. This heavy duty rechargeable battery is made of AGM lead lead dioxide technology. The extra thick lead plates in this battery allow for a deeper discharge with less harm to the battery and provides 20% more charge/discharge cycles compared to other AGM batteries. This AGM battery has less instant energy, but greater long-term energy delivery. The dilute sulfuric acid electrolyte is absorbed by separators and plates, thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape, avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak-proof and usable in any position. Perfect for applications requiring large amounts of power. Starting batteries, such as car batteries should not be used for deep cycle applications because of the thinner plates in these batteries. They are more prone to warping and pitting when discharged. You can connect these batteries in series or parallel depending on DC voltage needed. Features: Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding. Not restricted for air transport complies with IATA/ICAO Special Provision A67. UL-recognized component. Heavy duty compared to other AGM batteries - 20% more cycles Mount in any orientation. Computer designed lead calcium tin alloy grid for high power density AGM is ideal for back up and stored power applications Convenient carry handles Long service life float or cyclic applications Maintenance-free operation Thick plates within the battery to limit fluid expansion during freezing Low self discharge Copper terminals Specifications: Nominal Voltage 12V Number of cell 6 Design life 10 years with proper maintenance Nominal Capacity 77F(25C) 20 hour rate (10A 10.8V) 200Ah 10 hour rate (18.7A 10.8V) 187Ah 5 hour rate (35.8A 10.5V) 179Ah 1 hour rate (126A 9.6V) 126Ah Internal Resistance Fully Charged battery 77F(25C) 4mOhms Self-Discharge 3% of capacity declined per month at 20C(average) Operating Temperature Range Discharge -20~60C Charge -10~60C Storage -20~60C Max. Discharge Current 77F(25C) 1000A(5s) Short Circuit Current 3300A Charge Methods: Constant Voltage Charge 77F(25C) Cycle use 14.4-14.7V Maximum charging current 30A Temperature compensation -30mV/oC Standby use 13.6-13.8V 20.5" L x 8.78" H x 9.37" W Weight(lb) 138 5 year warranty from manufacturer defects

AIMS Power AGM 12V 100Ah Deep Cycle Battery Heavy Duty This 12V AGM battery is a heavy duty , deep cycle battery ideal for back-up power and stored power applications. Affordable without compromising quality, this battery will provide power for years. This heavy duty rechargeable battery is made of AGM lead lead dioxide technology. The extra thick lead plates in this battery allow for a deeper discharge with less harm to the battery and provides 20% more charge/discharge cycles compared to other AGM batteries. This AGM battery has less instant energy, but greater long-term energy delivery. The dilute sulfuric acid electrolyte is absorbed by separators and plates, thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape, avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak-proof and usable in any position. Perfect for applications requiring large amounts of power. Starting batteries, such as car batteries should not be used for deep cycle applications because of the thinner plates in these batteries. They are more prone to warping and pitting when discharged. You can connect these batteries in series or parallel depending on DC voltage needed. Features: Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding. Not restricted for air transport complies with IATA/ICAO Special Provision A67. UL-recognized component. Heavy duty compared to other AGM batteries - 20% more cycles Mount in any orientation. Computer designed lead calcium tin alloy grid for high power density AGM is ideal for back up and stored power applications Convenient removeable carry handle Thick plates within the battery to limit fluid expansion during freezing Long service life float or cyclic applications Maintenance-free operation Low self discharge Copper terminals Specifications: Nominal Voltage 12V Number of cell 6 Design life 10 years with proper maintenance Nominal Capacity 77oF(25oC) 20 hour rate (19.6A 10.5V) 100Ah 10 hour rate (19.6A 10.5V) 95Ah 5 hour rate (36.7A 10.5V) 87Ah 1 hour rate (138A 9.6V) 65.2Ah Internal Resistance Fully Charged battery 77oF(25oC) 5.7mOhms Self-Discharge 3% of capacity declined per month at 20oC(average) Operating Temperature Range Discharge -20~60oC Charge -10~60oC Storage -20~60oC Max. Discharge Current 77oF(25oC) 900A(5s) Short Circuit Current 2100A Charge Methods: Constant Voltage Charge 77oF(25oC) Cycle use 14.4-14.7V Maximum charging current 30A Temperature compensation -30mV/oC Standby use 13.6-13.8V 13L x 8.74H x 6.75W Weight(lbs) 70.5 5 year warranty from manufacturer defects